K-3D Forums » Topic: Using the ObjMeshWriter

K-3D Forums » Topic: Using the ObjMeshWriter http://www.k-3d.org/forums/topic/using-the-objmeshwriter Seven Degrees of Freedom en-US Sat, 11 Feb 2012 09:12:13 +0000 http://bbpress.org/?v=1.0.2 <![CDATA[Search]]> q http://www.k-3d.org/forums/search.php Timothy Shead on "Using the ObjMeshWriter" http://www.k-3d.org/forums/topic/using-the-objmeshwriter#post-2659 Sun, 25 Oct 2009 00:37:51 +0000 Timothy Shead 2659@http://www.k-3d.org/forums/ This message was originally posted by Bart Janssens on 04/03/2009 11:07:59 Hi Mirko, One thing to remember: the obj mesh writer only supports polygonal meshes at this time. I suspect you created a simple Cone, which is stored as a conic and hence nothing will be written to the obj file. Kind regards, Bart Timothy Shead on "Using the ObjMeshWriter" http://www.k-3d.org/forums/topic/using-the-objmeshwriter#post-2657 Sun, 25 Oct 2009 00:37:50 +0000 Timothy Shead 2657@http://www.k-3d.org/forums/ This message was originally posted by Carlos A Dominguez Caballero on 04/03/2009 10:23:51 Hi Mirko, Actually it should work the way you did it. here is a little example: Create->Polygon->PolyCylinder Create->MeshWriter->OBJMeshWriter then on the property box there should be a property called \"Input Mesh\" you click it and connect it to: Connect to...->PolyCylinder->OutputMesh and then just choose a filename. Once you do that you should have your obj correctly. I runned the example and worked ok I hope it works for you :-) sorry I can’t help on the VS thing cuz I have no idea hehe but anything else just let me know Bests, Carlos Timothy Shead on "Using the ObjMeshWriter" http://www.k-3d.org/forums/topic/using-the-objmeshwriter#post-2655 Sun, 25 Oct 2009 00:37:50 +0000 Timothy Shead 2655@http://www.k-3d.org/forums/ This message was originally posted by Mirko Matytschak on 04/03/2009 03:14:31 Hi all, I have found, that there is a MeshWriter for the .obj format. Unfortunately I don’t know, how to make it work. Let’s say, I have a simple document with a single Cone object. I found, that I can create an ObjMeshWriter object. I created one, connected it to the Cone instance and supplied a file name. I got an empty .obj file as result. Now, what exactly do I have to do, to make the Cone appear in the .obj file? Cheers Mirko